Section Milling
Advanced Technology
Predator™ patent pending section milling technology was developed to meet the need to mitigate sustained casing pressure, provide the best environment for barrier placement, and save cost through less rig time by saving trips in the well. The Predator™ enables stabilized multiple string section milling, while ensuring no harm to outer casing strings, regardless of casing eccentricities.
The Predator™
Predator™ Features
- Predator™ Performs Single, dual, triple casing string section milling, pilot milling & burnishing casing ID’s or underreaming to exact requirements.
- Predator™ Performs selective single string casing cuts with no damage to outer casing strings.
- Predator™ Multiple section mill tool designs for casing sizes 7″ – 30″ OD.
- Predator™ “Exclusive” – (SEL) Sweep Expansion Limiter. Adjust & limit sweep of blades cutting capability as well as lateral force applied to outer casing string.
- Predator™ “Exclusive” – (SEL) Sweep Expansion Limiter. Eliminates tool oscillation & stabilizer drift while maintaining proper blade contact for high milling efficiency.
- Predator™ “Exclusive” – (MBS) Modular Blade System. Change blades on location to mill, cut, underream or burnish clean casing ID’s. Change plans on the fly.
- Predator™ “Exclusive” – (FTJ) FloThru Jetting capability. Circulate or FloThru Entire Predator™ tool ID to assist in swarf / cement removal with adjustable jet settings.
- Predator™ Allows for bi – directional, multi-string section milling in upward & downward directions while utilizing outer casing string protection pads.
- Predator™ Allows entry through reduced casing ID’s to perform necessary section milling requirements such as well head restrictions and collapsed or damaged casings.
- Predator™ Designed for no harm to the outer casing strings when section milling if required.
- Predator™ Designed for long window lengths in excess of 100M, 300’ +/-
- Predator™ Overall short BHA length (<15’) compared to traditional section milling BHA’s at 90’ +
- Predator™ Design utilizes high tensile strength components and connections.
- Predator™ Can be custom designed to fit specific well geometries.
- Predator™ Is engineered for high ROP with light weight on bit, low torques, and high RPM.
Share this:
Case Studies
The Predator™ patent-pending section milling technology successfully completes well for Major Operator offshore California, USA
Well Location: Offshore California, USA. Operator Challenge: Operator needed to P&A the well while maintaining all casing strings integrity, pass through the 9 5/8” OD, 43#, 8.755” ID casing then section mill a 25’ window in the 13 3/8” OD, 72#, 12.347” ID casing....
Predator Multi-String Section Mill — The most advanced section milling technology.
Quicklinks
Contact
3901 Hwy 90 E.
New Iberia, LA 70560
info@dynastyes.com
337-367-8344
Follow
